Tascam Fw 1884 Drivers For Mac




Since much of the FW-1884’s operation pertains directly to your DAW software, TASCAM has prepared a series of application notes on using the FW-1884 with a number of different DAW programs. These application notes are included on the FW-1884 CD- ROM, and are available online in PDF format on the TASCAM website at www.tascam.com. The FW-1884 on Mac OS 9 or X and Windows 2000 or XP. As of this writing, MOTU Digital Performer 2.7 and above, Emagic Logic 6.1 and above and Cakewalk Sonar offer dedicated FW-1884 drivers and can use its native control surface codes. For other DAWs, the unit emulates a Mackie Control or Mackie HUI. PEAKING UNDER THE HOOD. I called tascam and got no help from them, apple was stumped too. Eventually I found out the problem was within the Fire Wire buses. The FW-1448 doesn't like converting from Fire Wire 800 to Fire Wire 400. After installing a Fire Wire 400 port on my Mac Pro I've found the Tascam will work around 50% of. Tascam’s FW-1884 offers eight XLR ins and preamps (each of two phantom-power switches governs a bank of four), and eight 1/4-inch line inputs with accompanying channel inserts for routing to. Release a new 64-bit Tascam FW-1884 driver for Mac OS X Mountain Lion. This petition had 560 supporters. Charlie Fabert started this petition to Frontier Design Group Frontier Design Group. Now the new OS X Moutain Lion (64-bit ONLY) is out, all the Tascam Fw-1884 users are not allowed to use it anymore. The driver has been updated for Windows.

Please review the charts below to see which TASCAM interfaces are supported in Apple macOS and Microsoft Windows operating system versions. Click here to find the latest drivers for any TASCAM interface.

List Updated September 30, 2016


Microsoft Windows

Win 98Win 2000Win XPWin x64 (XP 64-bit)Win Vista 64Win 7Win 8Win 10
US-428
US-224
FW-1884
US-122
FW-1082
FW-1804
IF-FW/DM
US-144
FireOne
IF-FW/DMmkII
US-122L
US-1641
US-100
US-122mkII
US-144mkII
US-2000
M164-UF
US-800
US-125M
US-1800
US-200
US-600
US-322
US-366
UH-7000
US-1200
US-2x2
US-4x4
US-16x08
US-20x20(USB 2 only)(USB 2 Only)
US-32
US-42

Apple macOS

Mac OS 8Mac OS 9Mac OS X 10.0 CheetahMac OS X 10.1 PumaMac OS X 10.2 JaguarMac OS X 10.3 PantherMac OS X 10.4 TigerMac OS X 10.5 LeopardMac OS X 10.6 Snow LeopardMac OS X 10.7 LionMac OS X 10.8 Mountain LionMac OS X 10.9 MavericksMac OS X 10.10 YosemiteMac OS X 10.11 El CapitanMac OS 10.12 SierraMac OS 10.13 High Sierra
US-428
US-224
FW-1884
US-122
FW-1082
FW-1804
IF-FW/DM
US-144
FireOne
IF-FW/DMmkII
US-122L
US-1641
US-100
US-122mkII
US-144mkII
US-2000
M164-UF
US-800
US-125M
US-1800
US-200
US-600
US-322
US-366
UH-7000
US-1200
US-1x2
US-2x2
US-4x4
US-16x08
US-20x20(USB 2 Only)(USB 2 Only)(USB 2 Only)
iXR
US-32
US-42
Tascam

Legend

Key:
Supported
DUnder Development
TIn Final Testing
Not Supported
I posted this over @ motunation.com as well, but just in case someone here might also have an answer, I thought I would try the crowd at the big blue...Tascam fw 1804
The following is what I put to MOTU* recently:Drivers
[SPAM][SPAM][SPAM][SPAM][SPAM]----
I cannot get DP to see my FW-1884. I have run all the installers from Tascam. The directory library/audio/plug-ins/motu control surface has the 'FW1884.bundle' (version 1.22) in it.
Audio MIDI Set up sees the Tascam.
When I go to the Set UpControl Surface Set upcommand, nothing happens when I click on the 'Add Control Surface' button.
I have tried putting the FW-1884 into all of its modes (Mackie, HUI, Native) but nothing changes.
I have had this gear working before on my old G5, I am now on an Intel I-mac - according to Tascam's forums, the driver is supposed to work on both PPC and Intel machines.
Any ideas?

Tascam Fw 1884 Downloads


Tascam 1884 Driver

YOUR HELP MUCH APPRECIATED
[SPAM][SPAM][SPAM][SPAM]----
Tascam fw 1804*I haven't heard back yet
BTW, I have also just ordered DP 6.0... maybe the classic 'sir, you need to upgrade to the latest version...' story is what will fix my problem.